sklearn.manifold
.TSNE¶

class
sklearn.manifold.
TSNE
(n_components=2, perplexity=30.0, early_exaggeration=12.0, learning_rate=200.0, n_iter=1000, n_iter_without_progress=300, min_grad_norm=1e07, metric=’euclidean’, init=’random’, verbose=0, random_state=None, method=’barnes_hut’, angle=0.5)[source]¶ tdistributed Stochastic Neighbor Embedding.
tSNE [1] is a tool to visualize highdimensional data. It converts similarities between data points to joint probabilities and tries to minimize the KullbackLeibler divergence between the joint probabilities of the lowdimensional embedding and the highdimensional data. tSNE has a cost function that is not convex, i.e. with different initializations we can get different results.
It is highly recommended to use another dimensionality reduction method (e.g. PCA for dense data or TruncatedSVD for sparse data) to reduce the number of dimensions to a reasonable amount (e.g. 50) if the number of features is very high. This will suppress some noise and speed up the computation of pairwise distances between samples. For more tips see Laurens van der Maaten’s FAQ [2].
Read more in the User Guide.
Parameters: n_components : int, optional (default: 2)
Dimension of the embedded space.
perplexity : float, optional (default: 30)
The perplexity is related to the number of nearest neighbors that is used in other manifold learning algorithms. Larger datasets usually require a larger perplexity. Consider selecting a value between 5 and 50. The choice is not extremely critical since tSNE is quite insensitive to this parameter.
early_exaggeration : float, optional (default: 12.0)
Controls how tight natural clusters in the original space are in the embedded space and how much space will be between them. For larger values, the space between natural clusters will be larger in the embedded space. Again, the choice of this parameter is not very critical. If the cost function increases during initial optimization, the early exaggeration factor or the learning rate might be too high.
learning_rate : float, optional (default: 200.0)
The learning rate for tSNE is usually in the range [10.0, 1000.0]. If the learning rate is too high, the data may look like a ‘ball’ with any point approximately equidistant from its nearest neighbours. If the learning rate is too low, most points may look compressed in a dense cloud with few outliers. If the cost function gets stuck in a bad local minimum increasing the learning rate may help.
n_iter : int, optional (default: 1000)
Maximum number of iterations for the optimization. Should be at least 250.
n_iter_without_progress : int, optional (default: 300)
Maximum number of iterations without progress before we abort the optimization, used after 250 initial iterations with early exaggeration. Note that progress is only checked every 50 iterations so this value is rounded to the next multiple of 50.
New in version 0.17: parameter n_iter_without_progress to control stopping criteria.
min_grad_norm : float, optional (default: 1e7)
If the gradient norm is below this threshold, the optimization will be stopped.
metric : string or callable, optional
The metric to use when calculating distance between instances in a feature array. If metric is a string, it must be one of the options allowed by scipy.spatial.distance.pdist for its metric parameter, or a metric listed in pairwise.PAIRWISE_DISTANCE_FUNCTIONS. If metric is “precomputed”, X is assumed to be a distance matrix. Alternatively, if metric is a callable function, it is called on each pair of instances (rows) and the resulting value recorded. The callable should take two arrays from X as input and return a value indicating the distance between them. The default is “euclidean” which is interpreted as squared euclidean distance.
init : string or numpy array, optional (default: “random”)
Initialization of embedding. Possible options are ‘random’, ‘pca’, and a numpy array of shape (n_samples, n_components). PCA initialization cannot be used with precomputed distances and is usually more globally stable than random initialization.
verbose : int, optional (default: 0)
Verbosity level.
random_state : int, RandomState instance or None, optional (default: None)
If int, random_state is the seed used by the random number generator; If RandomState instance, random_state is the random number generator; If None, the random number generator is the RandomState instance used by np.random. Note that different initializations might result in different local minima of the cost function.
method : string (default: ‘barnes_hut’)
By default the gradient calculation algorithm uses BarnesHut approximation running in O(NlogN) time. method=’exact’ will run on the slower, but exact, algorithm in O(N^2) time. The exact algorithm should be used when nearestneighbor errors need to be better than 3%. However, the exact method cannot scale to millions of examples.
New in version 0.17: Approximate optimization method via the BarnesHut.
angle : float (default: 0.5)
Only used if method=’barnes_hut’ This is the tradeoff between speed and accuracy for BarnesHut TSNE. ‘angle’ is the angular size (referred to as theta in [3]) of a distant node as measured from a point. If this size is below ‘angle’ then it is used as a summary node of all points contained within it. This method is not very sensitive to changes in this parameter in the range of 0.2  0.8. Angle less than 0.2 has quickly increasing computation time and angle greater 0.8 has quickly increasing error.
Attributes: embedding_ : arraylike, shape (n_samples, n_components)
Stores the embedding vectors.
kl_divergence_ : float
KullbackLeibler divergence after optimization.
n_iter_ : int
Number of iterations run.
References
 [1] van der Maaten, L.J.P.; Hinton, G.E. Visualizing HighDimensional Data
 Using tSNE. Journal of Machine Learning Research 9:25792605, 2008.
 [2] van der Maaten, L.J.P. tDistributed Stochastic Neighbor Embedding
 http://homepage.tudelft.nl/19j49/tSNE.html
 [3] L.J.P. van der Maaten. Accelerating tSNE using TreeBased Algorithms.
 Journal of Machine Learning Research 15(Oct):32213245, 2014. http://lvdmaaten.github.io/publications/papers/JMLR_2014.pdf
Examples
>>> import numpy as np >>> from sklearn.manifold import TSNE >>> X = np.array([[0, 0, 0], [0, 1, 1], [1, 0, 1], [1, 1, 1]]) >>> X_embedded = TSNE(n_components=2).fit_transform(X) >>> X_embedded.shape (4, 2)
Methods
fit
(X[, y])Fit X into an embedded space. fit_transform
(X[, y])Fit X into an embedded space and return that transformed output. get_params
([deep])Get parameters for this estimator. set_params
(**params)Set the parameters of this estimator. 
__init__
(n_components=2, perplexity=30.0, early_exaggeration=12.0, learning_rate=200.0, n_iter=1000, n_iter_without_progress=300, min_grad_norm=1e07, metric=’euclidean’, init=’random’, verbose=0, random_state=None, method=’barnes_hut’, angle=0.5)[source]¶

fit
(X, y=None)[source]¶ Fit X into an embedded space.
Parameters: X : array, shape (n_samples, n_features) or (n_samples, n_samples)
If the metric is ‘precomputed’ X must be a square distance matrix. Otherwise it contains a sample per row. If the method is ‘exact’, X may be a sparse matrix of type ‘csr’, ‘csc’ or ‘coo’.
y : Ignored.

fit_transform
(X, y=None)[source]¶ Fit X into an embedded space and return that transformed output.
Parameters: X : array, shape (n_samples, n_features) or (n_samples, n_samples)
If the metric is ‘precomputed’ X must be a square distance matrix. Otherwise it contains a sample per row.
y : Ignored.
Returns: X_new : array, shape (n_samples, n_components)
Embedding of the training data in lowdimensional space.

get_params
(deep=True)[source]¶ Get parameters for this estimator.
Parameters: deep : boolean, optional
If True, will return the parameters for this estimator and contained subobjects that are estimators.
Returns: params : mapping of string to any
Parameter names mapped to their values.

n_iter_final
¶ DEPRECATED: Attribute n_iter_final was deprecated in version 0.19 and will be removed in 0.21. Use
n_iter_
instead

set_params
(**params)[source]¶ Set the parameters of this estimator.
The method works on simple estimators as well as on nested objects (such as pipelines). The latter have parameters of the form
<component>__<parameter>
so that it’s possible to update each component of a nested object.Returns: self :